347345_1116 45
AHT Cooling Systems GmbH
Performing the battery change:
Observe separate instructions for changing the battery
(safe removal and replacement). These instructions are
provided to specialist personnel.
Battery type:
According to the instructions on changing
the battery.
changing the battery of the internal thermometer:
If the temperature display fails, please contact mainte-
nance services immediately (see
➙
Chapter 10.4).
changing the battery of the control unit:
If the error code E11 is displayed (see
➙
Chapter 4.3.1),
please contact maintenance services immediately (see
➙
Chapter 10.4).
For reasons of data completeness (date, time), an uninter-
rupted power supply is required by this built-in battery.
10.3
What to do if ...
All appliances are carefully tested for performance and
safety at the AHT test centre.
If a malfunction occurs (see
➙
Chapter 9.3) or the operat-
ing and indicator elements fail (see
➙
Chapter 4), contact
maintenance service immediately (see
➙
Chapter 10.4)
and notify them of:
-
The appliance type
-
The appliances serial number (see rating plate ➙ Chap-
ter 2.2.1 /additional label on the appliance, see ➙ Fig.
11)
Fig. 11: Label with serial number (example image)
-
Type of malfunction.
Make the appliance inaccessible for customers.
10.4 Maintenance services
For questions about maintenance (service, repairs, etc.),
please contact your local
AHt service partner
:
AHT service line: 00800/73783248
Online contact: www.aht.at/service
QR code:
For the service number of the local AHT service partner,
see also:
-
The label near the fl ashing light in the storage compart-
ment
All of the necessary and up-to-date information for com-
missioning and maintenance, e.g. replacement parts, is
available to the maintenance services.
11. Disposal
WArNiNG
risk of appliance tipping during disassem-
bly. Persons can be trapped.
▶
Use tilt protection.
▶ The appliance can only be disassembled
with the use of tilt protection.
▶
Tilt protection installation service (see
➙
Chapter 7) may only be removed when
there is no longer a risk of tipping.
▶ If there are any questions, contact mainte-
nance services (see
➙
Chapter 10.4).
cAutiON
improper disposal. Environmental damage.
▶ Please pay particular attention to the safe
and environmentally compatible disposal
- of the refrigerant
- of the insulating foam (thermal insulation
polyurethane foam containing pentane)
- of the compressor oil
-
of the battery
▶
Dispose of appliances
with brine circuits
(system) in compliance with valid national
disposal regulations and the regulations of
the local disposal partner.
Disposal procedure according to system
documentation.
▶
For appliances
without a brine circuit
(ap-
pliances with "AIR” mode ), electrical and
electronic devices are collected separately
according to the valid national disposal
regulations (for example, WEEE within
the EU) and the regulations of the local
disposal partner.
▶ Properly dispose of
batteries
in accordance
with the valid national disposal regulations.
▶
Appliances and batteries must not be dis-
posed of in household waste.
14-digit
serial number
