background image

36

Aibot X6 V2, Operation

3.4

Safety Features

3.4.1

Assist Mode (Altitude Regulation)

CAUTION

Sensors may provide wrong data

A malfunction may occur if the environmental information is inconsistent or not 
comprehensive. The functionality of some Safety Features relies on the infor-
mation of one or more of the following sensors: Pressure Sensor, Ultrasonic 
Sensor, GPS, Magnetic Compass.

Precautions:

Be aware that sensors may provide wrong data and always be ready to take 
over manual control.

It is important to consider some additional aspects:

Make sure that the ultrasonic sensors at the bottom side of the Aibot X6 
V2 are not covered or dirty.

Make sure that all accessories are securely fastened and no interference 
with the sensors may occur.

If an ultrasonic sensor is covered, this may result in a continuous climb. The 
assisted flight must be aborted immediately and the Aibot X6 V2 must be 
landed manually.

Fluctuations in air pressure may cause automatic adjustments of the flight 
level. Pay attention to cross ventilation and avoid opening doors or 
windows while flying indoors.

Safety Features

The Assist Mode contains the automatic altitude hold function. Above 2 m, an 
air pressure sensor is used to maintain altitude. The Aibot X6 V2 may change 
the level if there are changes in air pressure. If there are obstacles above the 
Aibot X6 V2 or when flying indoor, it is preferred to use Manual Mode. For 
example when inspecting the underside of a bridge.
After switching off the Assist Mode, a short drop may occur.

Do not switch Assist Mode on while flying aggressive manoeuvres. 

3.4.2

Minimum Altitude

CAUTION

Sensors may provide wrong data

A malfunction may occur if the environmental information is inconsistent or not 
comprehensive. The functionality of some Safety Features relies on the infor-
mation of one or more of the following sensors: Pressure Sensor, Ultrasonic 
Sensor, GPS, Magnetic Compass.

Precautions:

Be aware that sensors may provide wrong data and always be ready to take 
over manual control.

Summary of Contents for Aibot X6 V2









































































Reviews: