Presto Detacher
™
© 2012 AIC WAIKATO LLC
608-526-6882
30
Function
Range
Increments Factory
Settings
Effects of Adjustments
When CT
Logic is Yes
CT Logic
Average
4,8 or 16
4
The number of cow milk temperatures
that are averaged. The average is
considered the normal milk
temperature.
CT Logic
Deviation
Degrees
.3 – 5.9
Degrees
2
Degrees
The deviation degree is the amount the
milk temperature must deviate from the
average to set-off the high temp. alarm.
Milk Temp
Offset
-
60 to 60
0
Used to alter displayed temperature to
maximize milk temperature accuracy.
Invert Shutoff
Yes/No
Yes
Reverses polarity to Vacuum Shut-off
shifting valve.
Invert
Cylinder
Yes/No
No
Reverses polarity to Retraction Cylinder
shifting valve.
PWM
Yes for On
No for Off
Yes
Power Modulation output to shifting
valves, reduces output voltage by ½
after a full out put for 400
milliseconds. Yes for ON No for OFF
Number of
Groups
1 to 26
1
4
Defines the number of groups/lots of
cows being milked.
Parlor Type
Low Line
High Line
Low Line Set-up to match milk pipeline type.
Wash
Temperature
109.4 to
130 F
.2 F
120
F
Set this setting to the high wash water
temperature desired before the unit
provides an alarm.
AIC Waikato
Model
Number
70100,701
09 or
70400
70100
Select Model Number of Detacher,
Next to Factory Defaults “YES” The
Presto will set itself to the Factory
Defaults
Factory
Defaults
Yes/No
No
Choosing Yes, unit will reset to all
factory settings.
Password
Yes/No
No
Add Password Protection to the Set-up
Menu
Continue
Return to
Auto
Yes/No
Yes
Yes, makes the unit automatically
switch to automatic sensing when
continue is pressed.
Set-up Table:
All
Presto
Parlor
controls on the installation should be set-up the same. If Presto
Detachers are set-up via the Elite (See Elite set-up Instructions)
