Presto Detacher
™
© 2012 AIC WAIKATO LLC
608-526-6882
7
All wiring must be completed in
accordance
with
local
and
national
codes
and
regulations as applicable
Good Wiring Practices
All systems will only operate properly if they are
wired properly. Years of trouble free operation
should be the goal. Therefore, good wiring
practices
MUST
be implemented.
AIC Waikato Recommends and provides, for
splicing wires Scotch Locs and Wire Wizards and
two specialized tools, for Wire Jacket’s a Jacket
Cutter and Scotchlok Crimper
Wire Splicers
:
1. Scotchlok
2. Wire Wizard
Tools:
1.Wire Jacket Cutter:
2. Wire Loc Crimper
NOTICE
Electrical-Good Wiring Practices
Removing Wire Cable Jacket
Step 1. Adjust cutting depth of Wire Jacket Cutter
Step 2 Place Wire Cable into Wire Jacket Cutter,
rotate 360 degrees., remove cutter and pull jacket end
off cable.
BAD Do Not
cut into
Internal
Wire
Insulation
Step 3 Check to be sure there are
NO
cuts in the
insulation of the internal wires. If there is, readjust
the cut depth of the Wire Jacket Cutting Tool and re-
do.
Use Screw Drive to
Adjust Cutting Depth
