•
If one of the following situations arise, the equipment should be checked by service
personnel:
1.
The power cord or plug is damaged.
2.
Liquid has penetrated the equipment.
3.
The equipment has been exposed to moisture.
4.
The equipment does not work well or will not work according to its user manual.
5.
The equipment has been dropped and/or damaged.
6.
The equipment has obvious signs of breakage.
7.
Please disconnect this equipment from the AC outlet before cleaning. Do not
use liquid or detergent for cleaning. The use of a moisture sheet or cloth is
recommended for cleaning.
•
Module and drive bays must not be empty! They must have a dummy cover.
•
Equipment intended for installed in restricted access location.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries accord
-
ing to the instructions. After performing any installation or servicing, make sure the enclosure
are locked and screwed in position before turning on the power.
CAUTION
Where there is more than one connection supplying hazardous voltages or hazardous energy
levels to equipment, a prominent marking, located close to the entry point provided for a ser
-
vice person to gain access to the hazardous parts, shall be provided to indicate which discon
-
nected device or devices isolate the equipment completely and which devices can be used to
isolate each section of the equipment.
iii
