76
Chapter 4. BMC Configuration Settings
J4060-02 User Manual
4.6.5.6 SMTP
This page is used to configure the SMTP settings.
LAN Channel Number
Select the LAN channel to which the SMTP information needs to be configured.
Sender Address
Enter the ‘Sender Address’ valid on the SMTP Server.
Machine Name
Enter the ‘Machine Name’ of the SMTP Server.
• Machine Name is a string of maximum 15 alpha-numeric characters.
• Space, special characters are not allowed.
Primary SMTP Server
It lists the Primary SMTP Server configuration.
SMTP Support
Check this option to enable SMTP support for the BMC.
Server Address
Enter the ‘IP address’ of the SMTP Server. It is a mandatory field.
• An IP Address is made of 4 numbers separated by dots as in
“xxx.xxx.xxx.xxx”.
• Each Number ranges from 0 to 255.
• The first Number must not be 0.
The server address will support the following:
• IPv4 Address format.
• IPv6 Address format.
SMTP Server requires Authentication
Check the option ‘Enable’ to enable SMTP Authentication.
Summary of Contents for JBOD Series
