Importé par :
AIC International - 44980 Ste Luce sur Loire - France
-41-
Importé par :
AIC International - 44980 Ste Luce sur Loire - France
-42-
Step 4: Selection of unit of temperature.
By default, the
temperature is displayed in Celsius (°C).
In standby mode, press to display the temperature in
Fahrenheit (°F).
Measurements and comfort indicators for CO2.
Comfort indicators are suggested based on the following
measurements:
- 0 to 600 ppm The air is good.
- 601 to 1200 ppm It is recommended to ventilate the room.
- From 1200 ppm. It is necessary to ventilate the room.
Values over 2000 ppm can adversely affect the occupants of
the room: it is recommended to leave the room, ventilate it
and implement the necessary measures.
Reminder: Carbon dioxide is a colourless, odourless gas that
comes from a variety of sources (greenhouse gases,
transport, fuel, heating…).
The risks based on exposure:
- Slight exposure: mild headache, nausea, fatigue…
- Moderate exposure: persistent headache, drowsiness,
confusion…
- Extreme exposure: loss of consciousness…
Step 5: Install the software.
The measurements taken by the Quaelis 10 meter can be
recorded on a Windows PC. It enables up to 12700
measurements (up to 500 days recording when connected to
USB).
Download the software
according to your internet browser
by clicking below or copy and paste the link into your internet
browser:
Www.hestec.fr/documents/Setup%28in%29.msi
Www.hestec.fr/documents/setup.exe
