Chapter 2 Hardware Setup
10
SB401-LB User's Manual
Step 2
Remove the socket cover from the load plate.
Step 3
Close the load plate.
Step 4
Secure the Load Plate.
(4a)
Push downward on the locking lever on the CLOSE 1st side (see letter A).
Slide the tip of the lever under the notch in the load plate (see letter B).
Make sure the load plate tab engages under the socket lever when fully
closed.
(4b)
Repeat the steps to latch the locking lever on the other side (see letter C).
Latch the levers in the order as demonstrated.
NOTE :
The socket cover should be saved and re-used should the processor
need to be removed at anytime in the future.
Save the
protective
cover.
A
B
C
