Chapter 1 - Safety Rules
3
Beep!
M07Y9720
More
than
max. allowable tilt angle
fig. 1-9
• If traveling on a slope exceeding
maximum allowable tilt angle is
unavoidable, be sure to fully retract the
boom and lower the boom under the
horizontal.
M07Y9820
More
than
max. allowable tilt angle
Beep!
RETRACT BOOM
AND LOWER UNDER
THE HORIZONTAL.
fig. 1-10
• Do not operate the machine where
there are strong winds or gusts.
• Do not raise the boom when wind
speeds may exceed 12.5 m/s.
If wind speeds exceed 12.5 m/s when
the boom is raised, lower the boom and
do not continue to operate the machine.
• Do not increase the surface area that
can catch wind, such as covering the
worktable with a sheet. The stability of
the machine will decrease.
• The machine is not allowed to travel on
public highways.
3. Fall Hazards
DANGER
• Do not use a stepladder or stool on the
platform of the machine.
M07Y9900
fig. 1-11
• Do not climb on the handrail, stand on
top of the handrail, or jump from the
platform to another structure.
M07Y9A00
fig. 1-12
M07Y9B00
fig. 1-13
• Do not climb up to it or down from it
when the platform is raised.
Summary of Contents for SP12C
Page 1: ...Models SP12C SP14CJ Operation Manual NOTICE Read this manual before operating ...
Page 3: ......
Page 4: ......
