Chapter 4 - Part Names
18
(17) Platform rotation switch
To rotate the platform; ccw
operate this switch to left. To
rotate the platform; cw operate
this switch to right
(18) Fly jib switch
To raise the fly jib operate this
switch to up. To lower the fly
jib operate this switch to down
(19) Not used
(20) System failure light
This light goes on or blinks in the event
of a computer control system failure.
CAUTION
Stop using the machine and contact
Aichi service shop for inspections, if this
light goes on or blinks.
(21) Fuel level light
This light goes on when the
fuel level is low. Refill the fuel, if
this light goes on.
(22) Engine failure light
This light goes on in the event
of an engine failure, e.g. failed
charging system, abnormally low
oil pressure and abnormally high
cooling water temperature.
Check the indicator lights on the lower
control panel to identify the cause.
(23) Power indicator light
The power indicator light will go
on when the key switch on the
lower control panel turns to its
"UPPER CONTROL."
(24) Not used
(25) Tilt light
When the machine tilts more
than max. allowable tilt angle,
this light goes on, the alarm
buzzer sounds and platform
elevate function is disabled.
(26) Not used
(27) Overload warnig light
When the platform is
overloaded, this light blinks, the
alarm buzzer sounds and all of
the functions are disabled.
(28) Not used
(29) Foot switch
Press down the foot switch to operate the
machine on the platform.
The foot switch is canceled if any of
platform lift, travel and steering function
is not operate more than 20 seconds after
pressing down the foot switch, then the
power indicator light blinks. Release the
switch once and the power indicator light
turn on, then operate again to enable the
functions.
Summary of Contents for SP12C
Page 1: ...Models SP12C SP14CJ Operation Manual NOTICE Read this manual before operating ...
Page 3: ......
Page 4: ......