Chapter 10 - Transporting Method
43
• Set the boom angle to 60° or lower (that is,
at least 10° below the maximum rise angle
of 70°). Be sure that wires do not touch the
covering on the sides of the boom.
• If a wire does come in contact with the
boom, place a protective covering piece on
the boom to protect it.
M082M820
60°
Pads
1680 mm
* This figure shows the
gravity center at the
boom angle of 60
degrees.
fig. 10–6
Summary of Contents for SP12C
Page 1: ...Models SP12C SP14CJ Operation Manual NOTICE Read this manual before operating ...
Page 3: ......
Page 4: ......