22
WARNING
Do not move the machine to the
workplace until the workplace check is
performed.
• Make sure to check the workplace before
starting operation. Make sure there are no
following hazards:
‒ near electric power lines and apparatus
‒ drop-off s or holes
‒ sloped surfaces
‒ slippery or icy surfaces
‒ inadequate surface support to withstand
all load forces imposed by the machine
‒ bumps and fl oor obstructions
‒ curbs
‒ debris
‒ overhead obstructions
‒ hazardous locations
‒ wind and weather conditions
‒ presence of unauthorized persons
‒ other possible unsafe conditions
• Remove the hazards, if any, after the
workplace check. If it is not possible to
remove them, do not move the machine to
the workplace.
• The machine can be used only on surfaces
which are fi rm and for which all 4 wheels can
maintain contact evenly with the ground.
Workplace Check