DAC0063
10
GUN HANDLING
The first requirement for a good
resultant finish is proper handling of
the gun. The gun should be held
perpendicular to the surface being
covered, and moved parallel with it.
The stroke should be started before
the trigger is pulled and the trigger
should be released before the
stroke is ended. This gives accurate
control of the gun and material.
Spray width adjustment. Turn right for round, left for fan.
Fluid control screw. Turn to right to decrease flow, left to increase.
As width of spray is increased, more material must be allowed to pass
through the gun to obtain the same coverage on the increased area.
EN
Coating will
be light at
this point
Coating will
be heavy at
this point.
WRONG
RIGHT
Coating should be even
and wet when spraying.
6 to 12 inches
travel of gun
Start pull
stroke trigger
Release end of
trigger stroke.
