- 6 -
Chapter 2 Installation Guide
Unpacking the Chassis
The RCK-202B is shipped in a plastic bag that is placed inside a cardboard box. The
accessories are also shipped with the chassis. When you unpack the chassis you must:
- Make sure all the accessories and components listed above are present.
- Make sure the chassis has not been damaged in anyway. The installation steps outlined
above are described in detail below. Please refer to the relevant section(s).
Removing the top cover
The top cover is secured by a total of seven screws (three on each side and one on rear
side of the chassis).To remove the top cover, please follow the steps below:
1. Remove all seven top cover retention
screws
2. Slide the cover toward rear of the
chassis, then lift the cover off the chassis