- 8 -
Installing the Backplane
To install the backplane please follow the instructions below:
1. Remove the fours crews securing the
backplane bracket and pull upside to remove
from the chassis
2. Place the backplane to the bracket, and
insert the screw to secure the backplane to
the bracket
4.
鬆開背板支架的四顆螺絲
並向上取出支架
5.
將背板安裝上支架並鎖上螺絲
6.
Different backplane may have different Screw hole positions, please refer to their own
User manual for details.
Compatible backplane models are available in Appendix B.
Installing the
CPU Card
To install the CPU Card please follow the instructions below:
1. Remove the rear I/O slot bracket by
removing the screw
3. Place the backplane bracket with CPU
card inside back to the chassis, and secure
with four screws
2. Insert the CPU Card to the backplane
socket and secure with original screw
from I/O slot bracket
