background image

20

Disposal of Old Appliances

1.  When this crossed-out wheel bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 
2.  All electrical and electronic products should be disposed of separately form the municipal waste stream in accordance to laws designated by the government or the local authorities.
3.  The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.  For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter reference in which case the user will be required 
to correct the interference at his own expense.

Summary of Contents for GEN3G-200





















Reviews: