9
6. STANDER OPERATION
5. PRELIMINARY CHECKS
After charging the battery these checks should be completed prior to initially
using the stander:
1. Check handset functionality is correct.
2. Check to see that all indicator lights are functioning.
3. Check that the emergency stop button causes the stander to stop.
4. Check emergency lowering function.
5. Check that all leads are inserted, fastened and clear of the rear castors.
Handset
Features:
1. Raise / Lower function buttons
2. Leg spread function buttons (if applicable)
3. Battery charge indicators
4. Service indicator
• Press and hold the raise / lower or leg spread (if
applicable) function buttons to activate. Release to
deactivate. Beware of obstacles at all times to ensure
boom and legs can move freely.
• Battery charge indictors will flash when battery
reaches maximum recommended discharge of 18
volts, while the lifter is under load.
• Service indictor will illuminate when lifter has
reached recommended service interval, either 12
months since last service or 8000 lift cycles. At this
time the lifter needs to be serviced for safety and to
maintain applicable warranty.
A full load test should be completed at least every 12
months by an Aidacare service technician.
