19
18
KERA SIT2SIT OWNERS INFORMATION
INSPECTION AND CLEANING
To clean the Kera sit2sit, wipe it down with a damp cloth using warm water and a disinfectant cleaner.
Do not use harsh solvents such as phenol and chlorine as it may damage the hoist’s finish. Follow
laundering instructions on the Backstrap. Do not submerge any other components for cleaning.
It is recommended that the Kera sit2sit and its accessories are regularly cleaned and/or disinfected
between each use.
MAINTENANCE AND USER INSPECTIONS
The caregiver should always inspect the hoist for hygiene, wear and damage before each use to ensure
the safety of all users.
Every 12 months a more detailed inspection should be carried out by a suitably qualified technician.
Contact HT Systems if you have any concerns about the condition or safety of the hoist.
The lifetime of this product in normal use is 8 years if all maintenance and servicing is carried out
in accordance with the manufacturer’s instructions and demonstrably recorded.
WARRANTY INFORMATION
HT Systems, at its sole discretion, warrants that it will repair or replace defective components or faulty
workmanship for a warranty period of one (1) year from the date of manufacture of the product.
A warranty claim may not be accepted where:
•
Notice has not been given within four (4) weeks of the defect or faulty workmanship being first noticed.
•
Damage is caused by negligence, accident or deliberate abuse, product modification, incorrect use,
incorrect storage or maintenance and continued use of the part after the defect or faulty workmanship
is first noticed.
•
We reserve the right to substitute components of equal or better quality on the particular items being
repaired or replaced.
There will be no extensions to the original warranty period for any product that has been repaired or replaced.
PRODUCT INFORMATION
Product Information
Kera80
Kera120
Product weight
35kg*
Outside width
605mm
Minimum internal width (legs closed)
415mm
Maximum internal width (legs open)
1100mm
Length – handle upright
950mm
Length – handle down
1230mm
1580mm
Handle height (upright)
1300mm
1550mm
WARNING: Heavy. Use safe lifting practice
USER RECOMMENDATIONS
User Recommendations
Kera80
Kera120
User weight
Up to 80kg
Up to 120kg
User height
From 130cm to 190cm
WARNING: Before attempting a transfer, a clinical assessment of the user’s suitability for use with this
hoist should be carried out by a qualified health professional.
IDENTIFYING YOUR KERA SIT2SIT MODEL
The Kera sit2sit high models are raised by 80mm
and are identified by the green raiser as shown in
the image above.
The Kera sit2sit 80 and 120 models are identified
by different length handles and the sticker affixed
to the handle as shown in the image above.
The Kera sit2sit serial number is affixed to the right
side of the hub by the Knee Supports as shown in
the image above.
