7
Headrest
The headrest can be raised, moved sideward and moved
horizontally both forwards and backwards.
Height adjustment: Pull the release knob (1) and set
the desired height. Make sure that the release knob is
always correctly engaged.
Horizontal adjustment: Open the release lever (2),
set the desired position and pull the release lever
firmly again.
Side adjustment: After loosening the screws (3) the
headrest can be pushed sideways. Tighten screws
again.
Adjustable footplates
Footplate length can be adjusted by releasing the hand knob and
sliding the post up or down then re-tightened.
The footplates can be flipped up to make it easier to transfer
to or from the chair.
They can be adjusted to alter the angle to the ground.
Loosen screw (1) and set the desired angle.
Make sure that after any adjustment work, all screws
are tightened correctly. Ensure that you maintain the mini-
mum gap to the floor (2.5 cm).
1
CAUTION!
While making the adjustment, there must be no load on the
footboard!
Calf pads can be height and depth adjusted. To adjust
height, release the screws (1) and slide the calf pad
into the relevant position. By removing the calf pad
screw (2) they can be depth adjusted.
After making the adjustment, all screws must be
1
correctly tightened. 2
