aidapt VG798WB, Fixing And Maintenance Instructions

ASSEMBLY (CONTINUED)

Attach the rear wheels to the frame (F) (please note 

the rear wheels attach into the angled poles and will 

be directly underneath the handles)

Ensure that when you have attached the rear wheels 

the brakes are on the OUTSIDE of the trolley (F)

Secure the rear wheels with the e-clip (G)

Repeat process on the other side making sure that 

both legs are at the same height.

Attach the front wheels to the frame (H) (please note 

the front wheels attach into the straight poles and will 

be directly underneath the tray lips)

Secure the front wheels with the e-clip (J)

Repeat process on the other side making sure that 

both legs are at the same height.

HEIGHT ADJUSTMENT

Your trolley can be adjusted in height if 

required.

• To adjust the height remove the lower ‘E’ 

clips from the extension legs and pull each leg 

to the desired height. (See fig. 1.) 

• Ensure that all four extension legs are evenly 

adjusted. 

• Re-insert all ‘E’ clips facing the line of travel 

also ensuring that the ‘E’ clips have passed 

through the product frame and 

extension leg and are secure. (See fig 2.) 

• Never adjust the legs unevenly; this is 

dangerous and can seriously compromise the 

safety of the user. 

Check that the trolley is sitting evenly on the 

floor and there is no excessive rocking or the 

trolley is tilting to one side. If this is the case, 

please do not use the trolley, but repeat the 

above steps to correct the problem or contact 

your supplier for service support. 

F

G

H

J