aidapt VG798WB, Fixing And Maintenance Instructions

FIG 5

FIG 6

OPERATING THE BRAKES

The handbrake on your Aidapt Trolley Walker works very similar to a bicycle hand brake:

1. To stop, gently apply a gripping pressure to both brakes simultaneously (see fig. 3), this will slow down 

and stop the Trolley Walker.

2. The brakes on your Aidapt Trolley Walker have a park option (see fig. 4). To operate the park option, 

push downwards on both brakes simultaneously. You will feel the brake make a very slight click. Your 

brakes are now in the ‘lock’ position.

3. To unlock, simply pull up the brake again, you will hear a slight click as the ‘park’ disengages.

FIG 3

NUT B

NUT B

NUT A

NUT A

DEFAULT 

POSITION

USER

ADJUSTED

FIG 4

BRAKE ADJUSTMENT

Your Aidapt Trolley Walker brake system will 

require periodic adjustment. The brake adjustment 

is similar to bicycle brakes;

1. Fig. 5 shows the brake handle in its default 

delivered position. Should the brakes need 

adjusting they can be tightened by unlocking nut A 

and then un-screwing (anti-clockwise) nut B.

2. When adjusted the brakes should work in both 

normal and in parking mode. If needed then nut 

B (see fig.5 and fig. 6) can be turned further anti-

clockwise, which will tighten the brake cable more. 

When you are happy with the brake adjustment 

re-tighten nut A.

BRAKE ADJUSTMENT IS CONTINUED ON THE 

NEXT PAGE