VM844 Wall Mounted Key Safe
Fitting and Usage Instructions
INTRODUCTION
Thank you for deciding to purchase the Wall Mounted Key Safe from Aidapt. When used
correctly it is designed to give many years of reliable trouble-free service.
NB. This product must be installed by a competent adult.
BEFORE USE
•
Carefully remove all packaging. Avoid using any knives or other sharp instruments
as this may damage the product.
•
Check the product for any visible damage. If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
•
Please read these operating instructions carefully before you operate the lock or try
to change the combination of numbers.
NB. The Key Safe is delivered without a code – you need to save your chosen code the
first time you use it. You will not be able to open the safe if you lose the code and we will
not accept any liability for any damage caused by removing a Keysafe with lost code.
HOW TO OPEN THE KEY SAFE FOR THE FIRST TIME
•
Push the CLEAR button down
•
Push the OPEN button down
•
You can now remove the cover
HOW TO SAVE A NEW CODE
•
Choose your code (minimum 3 digits).
We recommend using a 4 digit,
non-concurrent code with no repeated
numbers, e.g. 4827 rather than 4485 or 8787.
•
•
On the inside of cover are 10 plastic screws
all facing upwards (see photo - Fig.1)
Using the key provided set your chosen
code by turning the corresponding
plastic screw behind the number by 180º
so that the arrow on the screw points down.
Repeat for each digit in your chosen code.
•
You have now saved the code.
•
To close the safe, push the CLEAR button
down and type in code, push OPEN button
down and replace cover on to back box.
HOW TO OPEN THE SAFE
•
Push the CLEAR button down
•
Type the code in
•
Push the OPEN button down
•
You can now open/remove the cover.
CARE & MAINTENANCE
Please make a check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 Fax: +44 (0) 1744 745 001 Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk adaptations@aidapt.co.uk sales@aidapt.co.uk
VERSION 3 - 20 APRIL 2015
•
•
•
•
Fig 1.
