Usage and Maintenance Instructions
Ver. 2 08/2012 (1703)
2
INTRODUCTION
Thank you for deciding to purchase the Plastic Shoe Horn from Aidapt. The Shoe
Horn is manufactured from the finest materials and components available. When
used correctly it is designed to give many years of reliable trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
A conventionally shaped shoehorn with an extended length for easier use. It has a
hook for positioning shoes and a hanging loop for storage.
INSTRUCTIONS FOR USE
Using the Shoe Horn requires a certain amount of dexterity:
•
Use the hooked end to position the shoe, if necessary.
•
Place the front of the foot into the shoe.
•
Reverse your grip and hold the hooked end of the Shoe Horn, slipping the
wide, rounded end between your heel and the back of the shoe.
•
Use the Shoe Horn to lever your heel further into the shoe, whilst it also
loosens the back of the shoe to allow for a comfortable fit.
•
Carefully pull the Shoe Horn out of the shoe.
CLEANING
Clean your Shoe Horn using a non-abrasive cleaner or mild detergent with a soft
cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may damage the
product beyond repair and should not be used. Always ensure that you wipe dry
the equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all
components for their safety.
If in any doubt, please do not issue or use, but immediately contact your
supplier for service support.
