background image

GENERAL SAFETY REQUIREMENTS 

Domestic wiring must be tested periodically by a qualified electrician at least once every 10 
years or at every change of occupancy. 

For office and retail premises, and buildings such as village halls, the wiring must be 
inspected at least once every 5 years. 

It is recommended that all buildings be fitted with smoke alarms (it is mandatory for new 
buildings). 

If the mains lead is damaged, it must be replaced by the manufacturer or an authorised 
service centre. If the mains plug needs to be replaced, proceed as follows: 

Connect the brown wire to the terminal labelled 
"L". 

Connect the blue wire to the terminal labelled 
"N". 

Connect the green/yellow to the terminal
labelled with the earth symbol or "E". 

Make sure that the cord-grip is positioned 
correctly (over the outer sheath of the cable) and 
it is fully tightened. 

If the plug is fitted with a 13 A fuse, replace it
with a 5 A fuse 

DISPOSAL AND RECYCLING 

You must not dispose of this appliance with domestic household waste.  
Most local authorities have specific collection system for appliances and 
disposal is free of charge to the end-user. 

When replacing an existing appliance with a similar new appliance your 
retailer may take the old appliance for disposal. 

TECHNICAL SPECIFICATION 

Power supply: 

230 V ~ 

Power consumption: 

70 W 

Maximum Operating current: 

0.3 A 

Average running cost: 

1p/3 hours 

Usage and Maintenance Instructions 

Ver.12/201

6 (2532) 

Summary of Contents for VP159R









Reviews: