Usage and Maintenance Instructions
Ver.3 09/2013 (2634)
5
OPERATING THE BRAKES
The handbrake on your Aidapt Rollator works very similar to a bicycle hand brake:
1.
To stop, gently apply a gripping pressure to both brakes simultaneously (Fig. 10),
this will slow down and stop your rollator.
2.
The brakes on your Aidapt Rollator have a park option (Fig. 11). To operate the park
option, push downwards on both brakes simultaneously. You will feel the brake
make a very slight click. Your brakes are now in the ‘lock’ position.
3.
To unlock, simply pull up the brake again, you will hear a slight click as the ‘park’
disengages.
Fig. 10
Fig. 11
STORAGE
1.
Grip the side bar and lift (Fig. 12).
2.
Continue lifting until the rollator fully closes (Fig. 13).
3.
You may also wish to remove the half-round back for storage; to do so pull the
silver coloured locking buttons located on either side of the tube lock outwards
(Fig. 14), then lift up the back to detach (Fig. 15).
Fig. 12
Fig. 13
Fig. 14
Fig. 15