The height of the handgrips can be
raised or lowered to suit the user.
To adjust the height of the handgrips
loosen the height adjustment knob
(see fig. 6). Raise or lower the
handgrips to the desired user height.
You will hear a click as the handgrip
locks into one of the height adjustment
positions (see fig. 6)
When the desired height has been
achieved retighten the height
adjustment knob to lock the position.
ENSURE THAT BOTH HANDGRIPS ARE
AT THE SAME HEIGHT BEFORE USE
DO NOT USE THE ROLLATOR UNLESS THE HANDGRIPS HAVE LOCKED
INTO ONE OF THE HEIGHT ADJUSTMENT POSITIONS AND THE HEIGHT
ADJUSTMENT KNOB HAS BEEN TIGHTENED.
2. The brakes on your Rollator have a park option
(see fig. 8). To operate the park option, push
downwards on both brakes simultaneously. You will feel
the brake make a very slight click. Your brakes are now
in the ‘lock’ position.
3. To unlock, simply pull up the brake again, you will
hear a slight click as the ‘park’ disengages.
OPERATING THE BRAKES
HEIGHT ADJUSTMENT
fig. 7
fig. 8
HEIGHT
ADJUSTMENT
POSITIONS
fig. 6
1. To stop, gently apply a gripping pressure to both
brakes simultaneously (see fig. 7), this will slow down
and stop your Rollator.
