Fixing and Maintenance Instructions
Ver.2 08/2012 (2127)
3
REMOVAL
1.
Lift each of the two levers.
2.
If suction remains, gently lift one edge with a finger.
3.
Do not use a sharp instrument which may damage the suction cup.
4.
Clean the Quick Rail from time to time with a non-abrasive cleaner.
LIABILITY WARNING
•
The Quick Rail is designed for use only on smooth non-porous surfaces.
•
Check the stability of the mounting surfaces before installation.
•
Always check attachment before each use.
THE USER ASSUMES ALL RISK OF INJURY DUE TO USE
As the conditions in which the Quick Rail is used are beyond the control of the manufacturer
or supplier, it is the obligation of the user to determine the correct and safe selection and
conditions of use of the Quick Rail. To the extent that the law permits the supplier’s liability is
limited to the cost of repairing or replacing the products at its discretion, and does not
extend to any loss or damage which may be caused as a consequence of misuse or improper
or defective installation. In no event shall the supplier be liable for any other loss or damage,
whether direct, indirect, foreseeable, consequential or special (including, but not limited to
physical injuries or loss of use, revenue or profit) whether based on warranty, contract, tort
(including negligence) or strict liability arising in connection with the use of the Quick Rail
CLEANING
Clean using a non-abrasive cleaner or mild detergent with a soft cloth only. Only use a mild
detergent or disinfectant; never use an abrasive cleaner. Always ensure that you wipe dry all
equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
