fig. 1
ASSEMBLY AND INSTRUCTIONS
1. Your Bed Transfer Aid is shipped ready assembled with its
handle at its lowest setting (VY428 & VY438).
2. To install, remove the mattress from the bed where
the Bed Transfer Aid is to be installed and check for any
obstructions.
3. Place the Bed Transfer Aid onto the base of the bed with
the large flat base on the bed frame and the looped
handle facing upwards level with the side of the bed
(see fig. 1)
4. Take the short strap and attach to the short bar (see fig. 2).
To attach the short strap feed the male buckle through
the looped strap, around the short bar (see fig. 3, 4 & 5).
Pull to tighten.
fig. 2
fig. 3
fig. 4
fig. 5
