ASSEMBLY AND INSTRUCTIONS (continued)
5. Take the longer strap and remove the female buckle from
the end (see fig. 6)
6. Attach the long strap to the long bar (see fig. 2) by feeding the looped end of the strap
through the D ring and pull the strap tight (see fig. 7, 8, 9 & 10)
7. Reattach the female buckle to the looped end of the long strap (see fig. 11, 12 & 13)
ENSURE THAT THE TEXTURED CENTRE PIN OF THE BUCKLE IS FACING UPWARDS AS
THIS PREVENTS THE STRAP FROM SLIPPING WHEN THE TRANSFER AID IS IN USE
(see fig. 11 & 12)
fig. 6
fig. 7
fig. 11
fig. 12
fig. 13
fig. 8
fig. 9
fig. 10
Looped end
