Cleaning and Storage
Circuit Diagram
1. Press the "On/Off" button to close the garment steamer.
2. Disconnect the power plug.
3. After cooling the product for 30 minutes, open the water tank cover, lift and tilt the product,
and pour out the water inside the product from the water tank cover.
4. Unscrew the drain plug counter-clockwise, the water in the principal machine will outflow from
the drain plug. (Note: Clear the accessories of the product before unscrew the drain plug in
case the wat er flows out of the principal machine gets the goods wet.)
5. After using the product for a long time, we suggest cleaning off the water scale regularly to
avoid impurities of water stain the clothing: disassemble the airway tube from the main body
and fill the water into the water inlet and shake the machine. Then pour out the dirty mixture
along with water from the water outlet. The performance will be better when repeating above
steps.
6. After winding the power cord and air duct, put the product in a free place.
Thermal fuse
Power
board
Heating body
Temperature controller
Display
panel
Wiring
220-240VAC / 50Hz
Input power
GB-11
GB
145*210MM/莫思妮,16156000A25922 MY-GD20D4W__310100JHJ 说明书/YDX,20170622