01
02
IMPORTAND SAFEGUARDS
SPECIFICATIONS
INSTALLATION INSTRUCTIONS
1. Motor shaft
2. Motor
3. Install by aligning
4. Rear grill
5.Pole
6.Base
7.Lock nut of base
enclosure
GB
GB
Warning :Read Rules for Safe Operation and Instructions Carefully.
1. Use this fan only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
2. This fan must not be used in potentially dangerous locations
such as flammable, explosive, chemical-laden or wet
atmospheres where gasoline, paint or flammable liquids are
used or stored.
3. Unplug power cord before installing,serving,or moving the Fan.
4. Never operate any fan with a damaged cord or plug or after
the fan malfunctions.If the supply cord is damaged, it must be
replaced by manufacturer,its service agent or a similarly
qualified person in order to avoid a hazard.
5. Never insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock
or fire, or damage the fan. To reduce the risk of fire, do not block
or tamper with the Fan in any manner while it is in operation.
6. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
7. Completely assemble the fan, according to instructions, before
connecting to power supply. When the fan was assembled, the
fan blade guard shall not be taken off anymore.
8. Always place the fan on a stable, flat, level surface when
operating, to avoid the chance of the fan overturning. Locate
the power cord so the fan or other objects are not resting on
it. Arrange power cord away from room traffic and where it will
not be tripped over.
Model No.
Voltage
Frequency
Rated Power
8433325184940
220-240V~
50Hz
55W
Main Body Installation
1. Align the column with the
groove on the base and fix
them together using the
Base Nut.
2. Unscrew the bolt on the
column.Align the installation
groove on the column and turn
clockwise to fix the connection.
Install the bolt and tighten.
1
2
3
4
5
6
7
Warming tips:Before the installation
process,screw all parts out of the main
body.
