Aim AVR7, Owner'S Manual

14

M

O

R

E

f u n c t i o n s

Normal timer recording

◆

For timer recordings, clock, date, and stations must be set correctly. 

◆

Load a cassette with its safety tab in place 
(see page 17) and with sufficient free space for the recording.

Call the video’s "MAIN MENU",
choose "Timer Program".

Decide if you want to record
"Once", "Weekly" or  "Daily"...
... and confirm.

If you wish to make changes:
Move to the position you want to
change using the  

/

buttons.

Change the setting using the PR+/- or
number buttons.
If all setting are ok, press 

or 

,

till you see “OK : CONFIRM” in the
bottom line.

Confirm.

Switch your video off. 

Type in one after the other: 

◆

The programme location
number;

◆

the time the broadcast starts,

◆

the time the broadcast ends, 

◆

the day of the broadcast, if it
is not today. 

◆

Select LP if you wish to make
a very long recording .

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

PR+/-:SELECT
OK:CONFIRM         MENU:END

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)

PR+/-: SELECT(AV)
0-9  :SETUP (PR)

/

:CORRECT   MENU:END

PR

--

START TIME

--:--

END TIME

--:--

START DATE --/--
TAPE SPEED

SP

TIMER  PROGRAM  (ONCE)

TIMER  PROGRAM (ONCE)

PR

01

START TIME

18:10

END TIME

20:30

START DATE 11/04(FRI)
TAPE SPEED

LP

PR+/-: SELECT(AV)

0-9 : SETUP (PR)

/

:CORRECT

OK:CONFIRM        MENU:END

◆

Wait a few seconds after typing a 

one-digit-number

.

◆

If you have made a 

mistake

, move to the position you want to change

using the 

/

buttons and change the setting.

◆

If programme timings 

overlap

, the machine will give a warning

message. If you don’t adjust the times, the machine will record the first
programme completely then continue with the second one.

◆

If there is no sufficient free space for the recording on the cassette the
video switches 

automatically to “LP”

for double recording capacity. 

◆

The recorder will 

eject

cassettes which have the safety tab removed

(page17).

◆

To cancel the normal timer recording, press         (stop) button more than
5 seconds.

15

M

O

R

E

f u n c t i o n s

Timer Review – changing and erasing

Call the video’s "MAIN MENU", 
choose "Timer Program".

Select the programming to change or erase. 

If you want to erase this programming press
button 0, confirm with OK.
If you wish to make changes:
Move to the position you want to change using
the /

buttons.

Change the settings using the PR +/– or number
buttons.
If all setting are ok, press 

or 

, till you see

"OK: CONFIRM" in the bottom line. 
Confirm changes with OK. Exit the menus.

TIMER  PROGRAM

PR

START

END

DATE

03   21:20  

22:20  13/04

01   18:30  

20:20  11/04

--    -- : --  

-- : --   -- / --   

--    -- : --  

-- : --   -- / --

--    -- : --  

-- : --   -- / --   

--    -- : --  

-- : --   -- / --

--    -- : --  

-- : --   -- / --

--    -- : --  

-- : --   -- / --

PR+/-:SELECT
OK:CONFIRM          MENU:END

TIMER  PROGRAM (ONCE)

PR

03

START TIME

21:20

END TIME

22:20

START DATE 13/04(SUN)
TAPE SPEED

SP

0 :ERASE

/

:CORRECT   MENU:END

2x