EVO3 Pro/Pista
User Manual
Release 1.04
www.aim-sportline.com
11
1 7
2.4 – ECU connection
EVO3 Pro/Pista
can sample data out coming from the vehicle ECU using the CAN/RS232
cable, that comes with the kit.
To know if the vehicle ECU is or not supported by AIM loggers and for further and updated
information concerning AIM loggers refer to download area, ECU connection section of
www.aim-sportline.com
.
Always refer to the ECU user manual to know its pinout and cable connections.
2 5
2.4.1 – How to connect EVO3 Pro to the ECU
The connection is made through the 22 pins Deutsch connector.
Using the
CAN
bus connect:
•
white cable labelled CAN 1+ to pin 20 of 22 pins Deutsch connector;
•
bleu cable labelled CAN 1- to pin 21 of 22 pins Deutsch connector.
Using
RS232
line connect:
•
RS232RX pin 17 white cable
•
RS232TX pin 18 bleu cable
2 6
2.4.2 – How to connect EVO3 Pista to the ECU
The connection is made through 12 pins AMP connector.
Using the
CAN
bus connect:
•
white cable labelled CAN 1+ to pin 4 of 12 pins AMP connector;
•
bleu cable labelled CAN 1- to pin 3 of 12 pins AMP connector.
Using
RS232
line connect:
•
white cable labelled RS232RX to pin 6 of 12 pins AMP connector;
•
bleu cable labelled RS232TX to pin 5 of 12 pins AMP connector.