EVO3 Pro/Pista
User Manual
Release 1.04
www.aim-sportline.com
13
To power EVO3 Pro/Pista:
•
check power voltage:
EVO3 Pro/Pista
needs an external 9/18 VDC power source
(the vehicle battery):
do not exceed these limits
;
•
connect black cable labelled “GND” to the vehicle battery negative (-) pole and red
cable labelled “9/18 VDC” to the vehicle battery positive (+) pole;
•
power
EVO3 Pro/Pista
through the vehicle master switch to save the vehicle
battery charge;
1 5
3.1 – EVO3 Pro/Pista front led
EVO3 Pro/Pista
has a little green led on the front panel.
As shown in the above image the led position is top left on
EVO3 Pista
and bottom central
on
EVO3 Pro
.
The led has a double function: it switches on when EVO3 is powered and shows the
logger status:
•
Led blinking 1Hz (1 time/second)
EVO3 waiting to record
•
Led steady (not blinking)
EVO3 sampling
•
Led blinking 3 Hz (3 times/second)
Status EVO3 non ok