EVO3 Pro/Pista
User Manual
Release 1.04
www.aim-sportline.com
15
4
Chapter 5 – EVO3 software, driver, configuration, transmission,
data download, online and maintenance
EVO3 Pro/Pista
connects easily to a PC with an USB cable and can be configured only
using
Race Studio 2
, the powerful software – supplied free – developed by AIM to
configure its loggers and analyse stored data.
EVO3 Pro/Pista
standard kit includes an USB cable and
Race Studio 2
and USB driver
installation CD.
WARNING: it is possible to configure the logger only after having installed software
and driver. Periodically check www.aim-sportline.com for new Race Studio 2
software and/or EVO3 Pro/Pista firmware releases.
Race Studio Configuration
user manual, that can be downloaded from download area,
software section of AIM corporate website
www.aim-sportline.com
contains all information
about how to:
•
install
Race Studio 2
under Microsoft Windows Xp® and Microsoft Windows Vista®
(32 bit only);
•
configure
EVO3 Pro/Pista
and set its channel;
•
set and manage standard and custom sensors;
•
calibrate and auto-calibrate sensors;
•
transmitting the configuration to EVO3 Pro/Pista once set;
•
calculate the engaged gear;
•
download sampled data;
•
enter online mode.
EVO3 Pro/Pista
does not need any special maintenance.
The only suggested maintenance is a periodical software / firmware update when released
by AIM (periodically check
www.aim-sportline.com
).
To update software/firmware connect to
www.aim-sportline.com
download area,
software/firmware area and select in sequence firmware and software options. Check if
software and/or firmware updates have been released, download them, run them and
follow the instructions that appears on the PC monitor.
