CHAPTER 11
44
11.1.7 – Display configuration
Press "Display" tab to configure the system display.
The page is divided in two different sections.
On the right you can add up to eight pages
setting its background as well as choosing
the system lateral button to be used to
browse this page, while on the left you will
manage the different fields, selecting the
proper information to be shown, the para-
meters, labels and the unit of measure.
Please use the lower left part of the display
for configuring each channel.
You can define:
n
the channel
n
the label
n
the measure unit
n
the end of scale for each channel shown
on the page (scale)
When the panel shows the desired configu-
ration push "Save" or "Close" for saving the
configuration. In case you have connected
your system to the PC, "Transmit" pushbut-
ton is available for transmitting the new
configuration to your device.
MXL2 MANUALE ENG OK 2016.qxp_Layout 1 28/10/16 14:36 Pagina 45
