28
8.1
–
Configuring MyChron5 660 as an Access Point (AP)
This is MyChron5 660 default configuration and is the easiest and most direct connection mode, ideal if you want to
communicate with one MyChron5 660 using one PC. It is free and so completely accessible by anyone. Please set an access
password as soon as possible.
To establish a Wi-Fi connection:
•
ensure that Wi-Fi is enabled.
•
read your MyChron5 660 name in the bottom line of the display main page (AiM-MYC5-660-20154 in the image below).
•
run RaceStudio3.
•
click Wi-Fi icon and select your device.
•
in a few seconds, the connection is established.
To set other parameters create a unique password to protect your device/your network. With a password, the communication is
safe and encrypted using WPA2-PSKstandard.
Characters allowed in the password are all letters, also capital, all digits and these characters
: ‘+
-_()[]{}$£!?^#@*\\\
”=~.:
;/%"
“Space”
type can be used if it is not the first one because this could cause incomprehension in some Windows versions.
