MyChron 3 Plus/Gold CAR – Version 1.01
1
TECHNICAL DOCUMENTATION
04/06/2004
GAUGE
Notes:
MyChron 3 Plus/Gold CAR
technical documentation, dimensions and pinout –
Version 1.01
MyChron 3 Plus/Gold
CAR
Figure 1:
MyChron 3 Plus/Gold Car
Introduction
MyChron 3 Plus/Gold CAR
represents the new generation of Aim data acquisition systems that
provides the driver with a wide, easy to use and multifunctional display.
MyChron 3 Plus/Gold CAR
monitors and displays RPM, 4 analog inputs (temperatures or
pressures for
Plus
version, temperature, pressures, potentiometers and Lambda sond for
Gold
version), speed, current gear number and lap (split) times. It has a backlight, which can be
switched on during night racing.
The logger records the following parameters:
•
4 analog inputs;
•
engine’s RPM;
•
lap and split times;
•
engaged gear number;
•
1 speed input;
•
lateral acceleration (
MyChron 3 Gold
only);
•
logger battery voltage;
•
logger temperature;
Data is stored in a huge internal flash memory (512 kbyte for
Plus
version and 8 Mbyte for
Gold
one) and is downloaded to a PC through an USB cable.
For further information concerning the gauge’s display, refer to the following drawing.
Displayed channels
2nd displayed channel
1st displayed channel
Low battery warning
Night vision
RPM digital value
Speed
Best lap time
Battery voltage
4 alarm led:
from "AL 1" to "AL 4"
Lap / Split times
USB port
Gear display
10 fully configurable shift lights
RPM graphical bar
Configurable RPM scaling
Speed unit of measure
Temperature unit of measure
Figure 2:
MyChron 3 Plus/Gold Car display unit
