Technical Documentation - Datasheet MyChron 4 – Version 1.00
3
MyChron 4 data download
The new
MyChron4
, thanks to its optional Data-key (
Figure 3
) allows you to
download data in two ways:
–
on the same Data Key
–
on a Pc
Figure 3: MyChron4
Data Key
Using only the Data Key you only need to connect Data Key Binder male
connector to the one labelled Exp/Pc on the back of the loggerand data
download starts automatically without the necessity of a Pc available.
Using the Pc:
–
connect the Data Key both to
MyChron4
, as said before and to the Pc
USB port
–
run
Race Studio 2
software
–
activate data download pressing the button corresponding to
MyChron4
in
Race Studio2
main window.
Software
When the logger is correctly installed and sensors have been plugged in,
please configure your logger to acquire consistent and correct information.
MyChron4
is completely configurable via keyboard.
To donwload data in a Pc you need
Race Studio 2
, the software properly
developped by Aim to analyze acquired data and supplied together with
the Data Key.
MyChron4 – Power notes
MyChron4
is available in two different versions:
internally powered
and
externally powered
.
•
MyChron4
with
internal power
needs a 9V battery;
•
MyChron4
with
external power
needs an external 9-14,5 V power
source (the kart battery for instance). This version of
MyChron4
has two cables, one red (power) and one black (GND) outcoming
from the back of the logger and have to be connected to the
external power.
