RF132, Presenter with RF wireless technology
15
TROUBLE SHOOTING
You can’t use the mark pen when you press and hold the RIGHT
button for more than 2 seconds
You need to run
aimMaster EZ
exe file before you can enable the
aimMaster EZ
. Then you can press and hold the RIGHT button for more
than 2 seconds to start using mark pen.
Note:
If you plan to use a computer not belonged to you, you need to store the
aimMaster EZ
exe file into a USB flash drive. Plug it into the computer
that you want to use for the presentation, and double click this exe file
before the presentation.
Computer does not respond to clicks on the presenter
1.
The presenter red indicator does not flash when you click the
presenter buttons
The receiver is not plugged to the USB port of computer
correctly
Either the receiver is not plugged into the USB port of your
computer, or the receiver is inserted into the USB port in the wrong
direction. If the receiver is plugged to the computer of the USB
port correctly, the blue indicator of the receiver should blink once.
The presenter batteries run out of electricity.
Please change two new A4 batteries.
The laser pointer is still working
The battery voltage might be too low although the laser pointer is
still working. Please change another pair of new batteries.
2.
The presenter red indicator does not flash when you click the
Notice:
Please do not use rechargeable batteries on this product
because they have lower voltage and will cause malfunctions.