RC240 3D Mouse Presenter
V1.2
10
Turn Presenter clockwise to increase the system
Volume, and turn Presenter counter-clockwise to
reduce the system volume
Mouse Left key, only when 3D Mouse is enabled.
LEFT
Click
When 3D Mouse is disabled, the Timer will be
shown on the right corner of the screen.
RIGHT
Click
Mouse Right key, only when 3D Mouse is
enabled.
Flashes Amber: Presenter is charging
Charging
Off: Presenter is Fully charged
Flashes Blue: when battery is between
100%~40% of full capacity.
LED on
LASER
key
Click any key
Flashes Amber: when battery is under 40% of full
capacity.
Place Check Mark
You can place red Check Marks
and draw Line Marks on the
screen to emphasis the
important parts.
Click
LASER key once to
activate 3D Mouse. Click
FEATURE key once to enable
the Check Mark. Move Presenter
to control the position of the
Check Symbol cursor. Each
click of OK key will place a
Check Mark on the screen.
Draw Line Mark
Click FEATUER key again to enable the
Line Mark. Press and hold OK key to
draw the red line. The longer time you
press, the longer red line extends to the
right.
Undo or Remove all Marks.
Press UP key to undo the previous
mark or DOWN key to clear all the
marks.
Timer Setting
Right click the
aimMaster
TM
Pro
icon on