TG Dash
User Manual
Release 1.04
www.aim-sportline.com
10
Press “OK” to start GPS Marker setting.
The screen here on the right appears.
Press “OK” to set start/finish line.
Only in case the logger has been
configured to capture split times – refer
to
Race Studio configuration
user
manual for further information - this
screen appears.
Confirm pressing “OK” button in the
physical point where the split is wished.
The display shows as many split to set
as many have been set less 1: the last
one is start finish line set before.
At the end of the procedure
TG Dash
shows this screen.
The message “GPS MARKER END”
confirms that the procedure is ended
successfully. Press “VIEW” to quit and
come back to the dash main window.
In case during GPS Lap timer Setting
there is for any reason a signal luck, the
display shows “GPS ERROR” and the
procedure has to be re-started.
Summary of Contents for TG Dash
Page 1: ...TG DASH User manual...