5
Work Area Safety
●
Keep your work area clean and
well lit.
Cluttered benches and
dark areas invite accidents.
●
Do not operate power tools in
explosive atmospheres, such
as in the presence of flamma-
ble liquids, gases, or dust.
Power tools create sparks which
may ignite the dust or fumes.
●
Keep bystanders, children, and
visitors away while operating a
power tool.
Distractions can
cause you to lose control.
Personal Safety
●
Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use tool while tired or under
the influence of drugs, alcohol,
or medication.
A moment of inat-
tention while operating power tools
may result in serious personal
injury.
●
Dress properly. Do not wear
loose clothing or jewelry. Con-
tain long hair. Keep your hair,
clothing, and gloves away from
moving parts.
Loose clothes, jew-
elry, or long hair can be caught in
moving parts.
●
Do not overreach. Keep proper
footing and balance at all
times.
Proper footing and bal-
ance enables better control on
the tool in unexpected situations.
General Safety Rules
●
Use safety equipment. Always
wear eye protection.
Dust mask,
non
-
skid safety shoes, hard hat,
or hearing protection must be
used for appropriate conditions.
Tool Use and Care
●
Use clamps or other practical
ways to secure and support the
work piece to a stable platform.
Holding the work piece by hand
or against your body is unstable
and may lead to loss of control.
●
Do not force tools. Use the cor-
rect tool for your application.
The
correct tool will do the job better and
safer at the rate for which it is de-
signed.
●
Do not use tool if switch does
not turn it on or off.
Any tool
that cannot be controlled with the
switch is dangerous and must be
repaired.
●
Store idle tools out of reach of
children and other untrained
persons.
Tools are dangerous in
the hands of untrained users.
●
Check for misalignment or bind-
ing of moving parts, breakage of
parts, and any other condition
that may affect the tool opera-
tion. If damaged, have the tool
serviced before using.
Many acci-
dents are caused by poorly main-
tained tools.
•
Use only Signature Series rec-
ommended accessories for
your model tool.
Accessories
that may be suitable for one tool,
may become hazardous when
used on another tool.
WARNING!
READ ALL INSTRUCTIONS
. Always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock, and personal
injury. Understand the following safety instructions before attempting to operate
this product. Always wear eye protection when working with power tools. Keep
these instructions in a safe place.
SAVE THESE INSTRUCTIONS
