Aimetis A10D Thin Client
6
Run Setup Wizard
To launch the Setup Wizard, click
Run Setup Wizard
from the
Settings
page.
The Setup Wizard includes the following configuration pages:
Language:
Select the language for the web interface.
Network Setup:
By default, the device is configured for DHCP; however, a static IP
address can be manually configured. In a multiple-device environment, manually assign
each Thin Client a static IP address to avoid IP address collisions.
Regional:
Specify the device time zone, or configure the device to synchronize with a
specific NTP server.
Configure Password:
Specify a password to access and manage the Thin Client through a
web browser or mobile device. Confirm the password to continue configuration.
Video Source:
The Thin Client can either connect to an Aimetis Symphony Mobile Bridge
server or directly to cameras via an IP address and user credentials.
Optional recommended setup:
Device Name:
Assign a name to identify the device on the network.
Register:
Register the device with Aimetis by clicking
Register Now
. An internet
connection is required. Registration can be completed at a later time.
Click
Back
to modify previous pages.
Click
Finish
to complete the Setup Wizard. Re-run the Setup Wizard any time via the web
interface by clicking
Settings > Run Setup Wizard
.
Setup Video Source
Thin Client can either connect via an IP address and user credentials to an Aimetis Symphony
Mobile Bridge server or directly to ONVIF-enabled cameras.
Note
: These instructions refer to using the Setup Wizard.
