i
Aimpoint
®
FlipMount
i
Aimpoint
®
TwistMount
2 OPERATION
WARNING:
Ensure the weapon is not loaded and the safety selector is in the
”safe” position before attempting to install, remove or perform maintenance
on the 6XMag-1 - other than attaching/detaching it under normal use.
2.1 Installing the Aimpoint
®
6XMag-1 on a weapon
The mounting surface (3) of the 6XMag-1 allow for mounting to any 30 mm
diameter ring mount when the rubber cover is cut away, see Fig. 2.
Fig. 3
Recommended mounts
3
For quick attachment/detach, we recommend the Aimpoint FlipMount or the
Aimpoint
TwistMount as shown in Fig. 3.
Follow the manufacturer’s instructions when installing the 6XMag-1.
3. Mounting surface
Fig. 2
Cut away rubber cover
