background image

3

Precautions

    

 Prohibited                    

 Do not dismantle unit                     

 Keep unit away from water                    

 Be sure to follow the instruction  

WARNING

Negligence could result in death or serious injury.

1. Do not dismantle or alter the unit. Fire or electric shock could 

result.

2. Keep the unit away from water or any other liquid.

Fire or electric shock could result.

3. High voltage is present internally. Do not open the case. 

Electric shock could result.

4. For power supply, use Aiphone power supply model speci

fi

 ed 

for use with system. If non-speci

fi

 ed product is used, 

fi

 re or 

malfunction could result.

5. Do not connect any non-speci

fi

 ed power source to the +, - 

terminals. Also, do not install two power supplies in parallel to a 
single input. Fire or damage to the unit could result.

6. Do not connect any terminal on the unit to an AC power line. 

Fire or electric shock could result.

7. Keep AC cord from being marred or crushed. If the AC cord is 

damaged, 

fi

 re or electric shock could result.

8. Do not plug or unplug unit with wet hands. Electric shock could 

result.

9. Periodically check for and remove dust on the power plug. If 

dust is left, it could cause the power plug to heat up, resulting 
in 

fi

 re.

10. Do not put any metal or 

fl

 ammable material into the unit 

through the openings. Fire, electric shock, or unit trouble could 
result.

CAUTION

Negligence could result in injury or damage to property.

1. Do not put anything on the unit or cover the unit with cloth, etc. 

Fire or unit trouble could result.

2. Do not install the unit in any of the following locations. Fire, 

electric shock, or unit trouble could result.

Places under direct sunlight or places near heating 

equipment that varies in temperature.
Places subject to dust, oil, chemicals, hydrogen sul

fi

 de (hot 

spring).
Places subject to moisture and humidity extremes, such as 

bathrooms, cellars, greenhouses, etc.
Places where the temperature is quite low, such as inside a 

refrigerated area or in front of an air conditioner.
Places subject to steam or smoke (near heating or cooking 

surfaces).

Where noise generating devices such as dimmer switches or 

inverter electrical appliances are close by.
Locations subject to frequent vibration or impact.

Locations subject to extremely powerful electric 

fi

 elds.

GENERAL PRECAUTIONS

1. The unit is inoperative during power failure.
2. In areas where broadcasting station antennas are close by, this 

system may be affected by radio frequency interference.

3. Keep the intercom wires more than 30cm (12'') away from AC 

100-240V wiring. AC induced noise and/or unit malfunction could 
result.

4. Do not connect any devices other than the Aiphone Models 

covered in this Manual.

5. All the units, except for Sub station, 

fl

 ush mount (NI-JA), are 

designed for indoor use only. Do not use at outdoor locations.

6. Using a mobile phone or professional-use radio equipment such 

as walkie-talkie close to the system may cause a malfunction.

7. If there are loud noises around the unit (such as music playing or 

children crying), the sound may break up and be dif

fi

 cult to hear.

NOTICES

We will under no conditions be liable for damage that occurs due 

• 

to the inability to communicate due to malfunctions, problems, or 
operational errors in this product.
We will under no conditions be liable for any damages or losses 

• 

resulting from this product's contents or speci

fi

 cations.

This manual was created by Aiphone Co., Ltd., all rights reserved. 

• 

Copying a part of or this entire manual without prior permission from 
Aiphone Co., Ltd. is strictly forbidden.
Please note that images and illustrations depicted in this manual 

• 

may differ from the actual ones.
Please note that this manual may be revised or changed without 

• 

prior notice.
Please note that product speci

fi

 cations may be changed for the sake 

• 

of improvement without prior notice.
This system is not intended for life support or crime prevention. It is 

• 

just a supplementary means of conveying information. Aiphone will 
under no conditions be liable for loss of life or property which occurs 
while the system is being operated.

Introduction

The NIM system is a communication system designed for applications in facilities such as hospitals, of

fi

 ce buildings, factories, 

• 

schools, and prisons. Various types of equipment enable you to con

fi

 gure a system that meets your needs for not only general 

purpose internal communications, but also for calling and communication in health care or various commercial applications.  This 
system also allows you to check the call history by connecting a PC installed with the speci

fi

 ed application software.

The NIM system is telecommunication equipment, not to be used as Medical Equipment.

• 

Summary of Contents for NIM-20B





















Reviews: