background image

Model

Height

Width

Depth

Height

Width Depth

Weight

TC-10M

117 mm  x  255 mm  x  230 mm

4-5/8"  x  10"  x  9"

1.8 kg (3.97 lbs.)

TC-20M

117 mm  x  330 mm  x  230 mm

4-5/8"  x  13"  x  9"

2.3 kg (5.07 lbs.)

TC-20G

97 mm  x  150 mm  x  230 mm

3-13/16"  x    6"  x  9"

1.0 kg (2.20 lbs.)

TC-40G

97 mm  x  300 mm  x  230 mm

3-13/16"  x   11-13/16"  x  9"

1.9 kg (4.19 lbs.)

TB-AD10

97 mm  x  150 mm  x  230 mm

3-13/16"  x    6"  x  9"

1.1 kg (2.43 lbs.)

TB-AD1

140 mm  x    74 mm  x    42 mm

5-1/2"  x    3"  x  1-5/8"

160 g (0.35 lbs.)

WARRANTY

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a
period of one year after delivery to the ultimate user and will repair free of charge or replace at no charge, should it
become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself
the sole right to make the final decision whether there is a defect in materials and/or workmanship; and whether or not the
product is within the warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in
violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This
warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by
Aiphone.
Aiphone will not be responsible for any costs incurred involving on site service calls.

8

8

SPECIFICATIONS

Power source

DC18V, 350mA max. or AC 15 – 16V, 50/60Hz. 750mA max.

Power consumption

6W max.  3W (standby)

Capacity

60 stations max., TB-SE or door stations incl.
One add-on selector TC-20G or TC-40G per TC-M.  1 to 3 TB-AD1 door adaptors or one 
TB-AD10 only alternatively, or one TB-ADM10 only.

Calling

TB-SE sub’s call-in is annunciated with intermittent tremolo tone and LED,lighting in red, 
both of which are held (approx. 40 seconds for IE/IF door stations).

Station-select button calls each TB-SE with intermittent tone.  Corresponding LED is lit to indicate 
which sub is called.  Master can call IE/IF door station by voice, with or without pretone (selectable).

Communication

Both stations communicate simultaneously via handset.

– 12 –

Dimensions & weight

Compatibility

TC-M system components:  TC-(10,20)M, TC-(20,40)G & TB-AD(1,10), cannot be intermixed 
with TB-(10,20)T masters, while TB-RC handset sub can be used with TC-M system.

TC-M to TB-SE
TC-M to TC-M
TC-M to TB-AD1
TC-M to TB-AD10
TB-AD1(10) to IE/IF door

0.65mm

φ

400m
200m

65m

150m

0.8mm

φ

600m
300m

100m

230m

1.0mm

φ

900m
480m

150m

360m

22AWG

1,300’

650’

210’

500’

20AWG

2,000’
1,000’

330’

750’

18AWG

3,000’
1,570’

495’

1,200’

Wiring distance

Wiring

2 conductors (parallel) or a pair in multi-cond. cable TC-M to ea. TB-SE
5 conductors  TC-M to TB-AD1

14 conductors max  TC-M to TB-AD10

3 conductors between  TC-M’s

In TC-M dual-master system, two parallel conductors cables are required for each common TB-SE
sub.

Printed in Japan (E)

AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
AIPHONE EUROPE N.V., ANTWERP, BELGIUM

TC-M-I(E) 0102A

Summary of Contents for Tc-10m













Reviews: