10
What is Bluetooth Pairing?
You have to pair the headset with a particular Bluetooth mobile phone
before first time use. Pairing means authentication. The users of the
Bluetooth enabled devices should use the same passcode for both
devices in order to pair them.
1. Make sure the headset is OFF.
2. Turn on your mobile phone.
3. Follow the manual of your mobile phone to activate Bluetooth
device pairing process.
4. Press and hold the
Power
button of the headset
for at least 10
seconds until the LED flashes red and blue alternately.
5. Your phone will found the headset device “
HSII
” in the device list.
Select it for pairing.
6. The phone display will prompt you for pairing PIN CODE. Enter
“
0000
”. Follow the instruction on the phone to complete Bluetooth
connection.
7. The LED will flash blue 3 times per 4 seconds (Nokia phones)
or once every 4 seconds (Sony Ericsson phones) to indicate a
successful connection.
8. If you turn off either the mobile phone or the headset, they will be
disconnected. The connection will be resumed automatically, if the
two devices are both on and the bluetooth function of your mobile
phone is activated.
Note:
Step 5 and 6 should be completed within
1 minute
as the LED
flashing red and blue alternately. Otherwise, please turn off the
headset and repeat step 4 again
.
Your headset can only memorize 8 different mobile phones.
The 9th phone will replace the first
.
Pairing the Headset for the first time
Answering / Ending / Rejecting Calls
Summary of Contents for Bluetooth Headset
