air
avionics
F. Configuration Parameters
Description
Activates data output of ’non-bearing targets’ in PFLAA datasets. This is recommended if
the connected traffic display on this interface does explicitly support such datasets.
•
Item Code:
NMEAPFLAAMODES3
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.12.25 RS-232 data port 3 PFLAA No-Track Flag Output
Description
Activates the data output of the FLARM no-track status flag in all PFLAA datasets.
•
Item Code:
NMEAPFLAANOTRACK3
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.12.26 RS-232 data port 3 PFLAE Error Messages
Description
Activates the output of error messages within the $PFLAE dataset. In addition to the error
itself, an error message is transmitted over the data port.
•
Item Code:
NMEAPFLAEMSG3
•
Valid Values:
ON, OFF
•
Default Value:
ON
F.12.27 RS-232 data port 3 GDL90 Send Own MSL Altitude
Description
The GDL90 protocol description specifies an output of the ownship GPS altitude, relative to
the WGS-84 ellipsoid. The output can be changed to be relative to MSL, by activating this
setting.
•
Item Code:
GDL90SENDMSLALT3
•
Valid Values:
ON, OFF
•
Default Value:
OFF
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
95
