air
avionics
1. General Description
1.6 Liability
IN NO EVENT WILL AIR AVIONICS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY
TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT.
1.7 Unpacking and Inspecting Equipment
Before installation into an aircraft, the equipment should be visually inspected for shipping
damages and completeness. If the unit is damaged, notify the carrier. Do not return the
unit to AIR Avionics before the carrier has authorized a claim.
The following parts are normally included with an AT-1:
Part
Part number
Description
1 x AT-1 main unit
AT-1
AT-1 main unit
1 x USB cable
B582
USB extension cable (1m)
1 x Data connector
FL15-26S7
D-SUB 26HD crimp connector, backshell, and, contacts
1 x FLARM Cockpit Antenna
B571
FLARM Antenna for cockpit installation (SMA)
1 x 1090 Cockpit Antenna
B572
ADS-B/XPDR Antenna for cockpit installation (rpSMA)
1 x GPS Antenna
B575
Active GPS Antenna for cockpit installation (QMA)
Shouldtherebemissingpartsorsparepartsrequired, pleasecontactAIRAvionicsorvisit
http://www.air-
store.eu
1.8 Installation Materials
For obtaining installation material or tools, please visit
http://www.air-store.eu
or contact
the AIR Avionics support.
1.8.1 Tools Required but not Supplied
Using crimp contacts for all connectors is recommended. The table below identifies crimp
tools required to ensure consistent, reliable crimp contact connections for the D-Sub
connectors.
Military Part Number
Tool
M22520/2-01
Hand crimping tool
M22520/2-06
Positioner (female)
M22520/2-09
Positioner (male)
M81969/14-01
Insertion and extraction tool
AT-1
·
Installation Manual
·
rev. 4.0
·
2020/01/09
5
